Titanium General || NVR Firmware File Formats: .fls vs .pkg ||

Titanium General || NVR Firmware File Formats: .fls vs .pkg ||

NVR Firmware File Formats: .fls vs .pkg

Applies to: TVT NVR firmware (confirm brand)

Question

Why are some NVR firmware files in .fls format and others in .pkg format?

Answer

The file extension shows which type of system the NVR uses:

ExtensionNVR system type
.flsSingle-system NVR
.pkgDual-system NVR

Both single-system and dual-system NVRs are in mass production, so customers will see different firmware packages with different extensions.

Important: Do Not Mix Formats

On the same NVR platform, only one format is ever used, either .fls or .pkg, never both. Because of this, a firmware package cannot be upgraded from one format to the other. Always use the firmware file that matches the format of your NVR’s current firmware.


How Dual-System Upgrades Work

A dual-system NVR has a master system and a slave system. To keep upgrades stable, the NVR upgrades them in stages:

  1. The slave system is upgraded first. The master system keeps running normally.
  2. After the slave upgrade finishes, there is a monitoring period of about 10 minutes.
  3. If the slave system runs normally, the master and slave systems synchronize. The master system is then upgraded while the slave system takes over operation.
  4. After the master upgrade finishes, the master system also goes through a monitoring period until it is stable.

A single-system NVR doesn’t have this mechanism because it has only one system.

Notes

  • Because a dual-system upgrade runs in stages with monitoring periods, it takes longer than a single-system upgrade. Advise customers not to power off the NVR during this time.