Titanium Mobile App || App Live View Channel Order Doesn’t Match the NVR Web Interface ||

Titanium Mobile App || App Live View Channel Order Doesn’t Match the NVR Web Interface ||

App Live View Channel Order Doesn’t Match the NVR Web Interface

Symptom

The channel order in the app’s live view doesn’t match the order on the NVR web interface. For example, the web interface shows Channel 10 as “Foyer,” while the app shows Channel 8 as “Foyer.”



Cause

The app and the web interface sort channels differently. This is current product design.

InterfaceSorts byOrder shown
App live view                   winIndex               Matches the live view window order on the NVR’s local GUI. Changes when channels are dragged.
Web interfaceChannel ID               Matches the order in the NVR’s device list, before any manual dragging.

How winIndex works

On the NVR’s local live view, the window order initially matches the device list on the right. For example, “IPC” corresponds to winIndex 1.

If a user drags a channel locally, its winIndex changes. For example, moving the third camera, “IPC1,” into the first live view window changes IPC1’s winIndex to 1, and the app then identifies it as the first channel.

The app doesn’t update this order in real time. It refreshes to the latest winIndex order after it reconnects to the NVR. The web interface keeps the original order returned by the protocol, so it doesn’t change when channels are dragged locally.

Conclusion

  • No local dragging on the NVR: the app and web channel orders are the same.
  • Channels dragged or layout changed locally on the NVR: the app and web channel orders will differ.

Solution

This is expected behavior, not a fault. To make the orders match again, restore the original channel order in the NVR’s local live view so it follows the device list, then reconnect the app to the NVR to refresh it.