Titanium CMS+Software || NVMS “Backup Failed” When Backing Up Recordings from a Directly Connected IPC’s SD Card ||

Titanium CMS+Software || NVMS “Backup Failed” When Backing Up Recordings from a Directly Connected IPC’s SD Card ||

NVMS “Backup Failed” When Backing Up Recordings from a Directly Connected IPC’s SD Card

Applies to: Titanium NVMS with IPCs connected directly (not through an NVR), recordings stored on the IPC’s SD card (confirm versions)

Symptom

NVMS can’t back up recordings from the SD card of a directly connected IPC and shows the error “Backup Failed.”



Cause

Playback and recording backup on an IPC share the same playback resource, which supports only one stream at a time. In NVMS, a recording download is a form of streaming playback, so one NVMS client can’t play back and back up the same IPC at the same time.

This limit applies only to a single NVMS client working with one IPC. Multiple clients and the IPC web interface are not affected:


Solution

  1. In NVMS, close the playback for the IPC you want to back up.
  2. Start the backup again.

Newer NVMS clients

The latest NVMS client shows clearer messages when this happens:

  • “Device busy. Waiting in queue (Please close the video playback of this IPC first!)”
  • A message in the lower-right corner: “Please close the playback stream before backing up video from the device.”

If either message appears, close the playback for that IPC, then retry the backup.

Verification

The backup starts and completes without the “Backup Failed” error.