Titanium General || How to Play Back Recordings from an NVR/DVR Hard Drive Directly on a PC ||

Titanium General || How to Play Back Recordings from an NVR/DVR Hard Drive Directly on a PC ||

How to Play Back Recordings from an NVR/DVR Hard Drive Directly on a PC

Applies to: Titanium NVR and DVR hard drives (confirm models)

Symptom

The NVR has malfunctioned and can’t play recordings, or a new hard drive has been installed and the NVR can no longer play recordings from the old drive. The recordings need to be played back on a computer instead.

Cause

  • NVRs/DVRs typically use SATA hard drives, which can’t be plugged directly into a computer’s USB port. Laptops usually have no spare SATA port, and wiring a drive inside a desktop PC can be inconvenient. A USB-to-SATA adapter, dock, or enclosure solves this.
  • Recordings on the drive use Titanium’s private storage format, so the footage can’t be browsed or played like a standard external drive. A dedicated player is required.

Solution

What you’ll need

  1. A USB-to-SATA adapter, hard drive dock, or hard drive enclosure (referred to below as “enclosure”). This must be purchased separately.
  2. The RPAS player installed on your computer. Download:https://drive.google.com/drive/folders/171c6UfK8N8uEjGTj1vHztrpcqD7pa2Zp

Steps

  1. Insert the hard drive into the enclosure and power it on.
  2. Connect the enclosure to the computer with a USB port.
  3. Open the RPAS player and click Playlist > Open Disk. 


  4. The hard drive appears in the list. Select it and click OK. 


  5. Wait for the drive to finish loading.

Verification

Click a video entry. If it plays, the operation was successful.