Titanium Recorder || NVR “Restore Default Parameters” vs. “Restore Factory Settings” ||

Titanium Recorder || NVR “Restore Default Parameters” vs. “Restore Factory Settings” ||

NVR “Restore Default Parameters” vs. “Restore Factory Settings”

Applies to: Titanium NVR (confirm models and firmware versions)

Question

Why does the NVR local GUI offer both Restore Default Parameters and Restore Factory Settings, while the web interface offers only Restore Default Parameters? What is the difference between them?




Answer

This is current product design. A factory reset requires a high level of permission, so it is available only from the NVR’s local GUI.


Restore Default Parameters
  • Resets configuration parameters to their defaults.
  • Keeps the settings from the activation wizard: language, video format, time zone, admin password, date format, and time format.
  • Keeps the device’s activated status.

Restore Factory Settings

  • Returns the device to its factory state and clears all configuration parameters.
  • The activation wizard appears at the next startup.
  • Must be performed by the device owner, who must log in to the NVR locally first.

Activation Wizard vs. Power-on Wizard


Steps

To restore default parameters (local GUI or web)

  1. Open the restore option in the NVR’s settings.
  2. Select Restore Default Parameters.
  3. Confirm. The language, video format, time zone, admin password, date and time formats, and activated status are kept.

To restore factory settings (local GUI only)

  1. Log in to the NVR locally with a monitor and mouse.
  2. Open the restore option in the NVR’s settings.
  3. Select Restore Factory Settings, then confirm.
  4. Complete the activation wizard when the NVR restarts.