Titanium IPC || How to Configure Boundary Scan on a PTZ Camera ||

Titanium IPC || How to Configure Boundary Scan on a PTZ Camera ||

How to Configure Boundary Scan on a PTZ Camera

Applies to: Titanium PTZ cameras (confirm brand and models)

Question

How do I configure a PTZ camera’s boundary scan?

Answer

Boundary scan is a scanning pattern centered on the PTZ camera’s current position. Preset 92 is the left boundary and preset 93 is the right boundary. The camera scans back and forth repeatedly: left → right, right → left, left → right, and so on.

PresetFunction
92Left boundary
93Right boundary


Steps

  1. Move the PTZ camera to the desired left boundary position and save it as preset 92.


  2. Move the camera to the desired right boundary position and save it as preset 93.

  3. Go to Task or Home Position and select Boundary Scan to apply the settings.

Notes

  • Presets 92 and 93 are reserved for this function. Don’t use them for other purposes.
  • Boundary scan will not work correctly until both presets are saved.