Titanium General || How to Retrieve an IPC’s MJPEG Stream via HTTP ||

Titanium General || How to Retrieve an IPC’s MJPEG Stream via HTTP ||

How to Retrieve an IPC’s MJPEG Stream via HTTP

Applies to: TVT IPC (confirm brand and models). Most current models support MJPEG; older, discontinued models may not.

Question

How do I pull an IPC’s video stream over HTTP?

Answer

The IPC supports HTTP streaming, but only in MJPEG format. Set the camera’s video compression to MJPEG, then open the stream URL in a browser.

Steps

  1. In the IPC web interface, go to the video configuration and set Video Compression to MJPEG.
  2. Open Chrome or Firefox and enter the following URL: http://IP:port/mjvideo.cgi&user=admin&psk=123456&channel=2
  3. Replace each parameter with your camera’s values (see the table below).



URL parameters
ParameterDescription
IPThe IPC’s IP address
portHTTP port (default 80)
userUsername (plain text)
pskPassword (plain text)
channelStream number: 0 = main stream, 1 = sub stream, 2 = third stream, 3 = fourth stream

Example

http://192.168.52.30:80/mjvideo.cgi&user=admin&psk=123456&channel=2

Verification

The browser displays the camera’s live MJPEG video.