Titanium CMS + Software || NVMS 2.0 Channel Group Control (2.1.1)
Click "Channel Group Setting" under "Resource Management"
Click add
Enter a "Channel Group Name"
Select the desired cameras for the group
Click the right arrow to add the checked cameras into the group
Click OK
Repeat the process for additional camera groups
Be mindful of the "Parent Channel Group" - leave blank to keep at the same level
Open a Live View Tab
Drag and drop the Channel Group to begin streaming
Related Articles
Titanium CMS + Software || LPR Initial Configuration for NVMS 2.1.3
LPR Initial Configuration for NVMS 2.1.3 Preface - This is for the first time configuration of an LPR to NVMS. This will allow the export of plate captures. Requirements NVMS V2.1.3 LPR connected to an NVR NVR connection through AutoNAT 1. Go to ...Titanium CMS + Software || Export/Import NVMS-1000 Configurations- Windows PC
Please make sure you are logged into NVMS-1000 prior to continuing with the following steps : Step 1- Please select the Control Panel option located above Step 2- Under Basic please select- Backup System Config Step 3- Select Browse - Create file ...Titanium CMS + Software || Adding a Recorder to NVMS for Viewing Cameras Inside the Local Network ||
Viewing Cameras Within the Local Network: When adding a recorder to NVMS with IP cameras, the default configuration allows you to view the cameras only within the local network. Viewing Cameras Outside the Local Network: To view the cameras outside ...Titanium CMS + Software || NVMS1000 Notice
The NVMS1000 program is EOL. 3.4.5 is the final version for the software with 3.0 recorders. No future updates. Recorders on the Titanium Interface will require the use of NVMS 2.0 Lite(256 Ch free) or Standard (32 Ch free) Windows: ...Titanium CMS + Software || Live View NVMS 2.0 (2.1.1)
Select "Live View" You may use the "area" (house icon) to call the cameras within the area. Alternatively, you may call the cameras individually. To call a channel you can either drag and drop OR select a channel within the layout then double click ...