Titanium General || Default Password ||

Titanium General || Default Password ||

Titanium General || Default Password

Author: ENS Technical Support
Date: 09/16/2026
Product / Category: Titanium NVR/DVR Default Password

Article Description

Titanium devices use 123456 as the default password unless a custom password was created during activation. If you can’t access your device or have forgotten the password, contact Technical Support for a reset.

Applies To

  • Titanium NVR/DVR

Requirements / Before You Begin

  • Monitor and mouse connected to the device
  • HDMI or VGA cable
  • Device Serial Number (S/N), if you need a password reset (see Notes / Troubleshooting)

Procedure

The password you use depends on whether the device has already been activated.

1. Identify the device status

  • Not yet activated (no custom password): use the default password 123456.
  • Previously activated: the default password may no longer apply. Use the password that was created during the initial activation.

2. Log in

  1. Power on the device and connect the monitor and mouse.
  2. At the login screen, enter the password for your device status from step 1.
  3. If this is the first login and no custom password exists, the system will prompt you to create a new password. Enter and confirm it.

[Insert screenshot: login or password creation screen]

Store your new password securely for future access.

Verification

You are logged in and see the device’s main screen. On a first login, you were prompted to create a new password.

Notes / Troubleshooting

Important password information

  • Passwords may be changed during activation, or later by an authorized user.
  • If the default password doesn’t work, don’t repeatedly try different passwords. Repeated failed attempts may restrict account or device access.
  • If the password is forgotten, lost, or unavailable, contact Technical Support for a password reset.

Password reset requirements

Technical Support needs the device’s Serial Number (S/N) to verify the device and process a reset. The S/N is usually found on the device label, on the packaging, or in the device’s system information, depending on the model.

[Insert screenshot: device label with the S/N circled]

When you contact support, have this information ready:

  • Titanium device model
  • Device Serial Number (S/N)
  • Description of the issue
  • Any error message shown on the device

The correct S/N lets Technical Support identify the device and choose the right reset procedure.

If you have trouble accessing the device or need a reset, contact Technical Support before attempting further troubleshooting.