Titanium IPC || 12 hour time stamps || Web GUI
Titanium IPCs do not support 12 hour time stamps. The NVRs do support 12 hour, but what happens is this will change your system time to 12 hour. The IPC overlay OSD is limited to operating in 24 hour mode. (See photos)
Firmware version 5.1.1 to allow for 12 hour time stamp. Firmware may not be available on all models.
Related Articles
Titanium IPC || PTZ Tour / Cruise Setup || Web GUI
Titanium PTZ Tour/ Cruise Set-up || Web GUI Login to Camera through IP address Select Config Select PTZ Select Auto Feature Then select Presets Create separate Presets for each view you would like to be focused on during the tour After all you ...Titanium Recorder || Add Emerald IPC to Titanium NVR || WEB GUI
Emerald IPC cameras come with ONVIF enabled by default. 1- Identify the camera on the network using ENSTools, login and configure a static IP address. 2-Login on the 3rt party brand in this case is a Titanium NVR, add camera and use the manual ...Titanium IPC || SD Card Recording and Playback || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Titanium IPC || Setting Up License Plate Recognition || Web GUI
You will need a Titanium NVR and Titanium IP Camera that support the License plate Recognition function. Select “Function Panel” on the main page after logging in. After selecting “Function Panel”, select the “Camera” option. Add Camera on the upper ...Diamond IPC || Configuring Date and Time on an IP Camera || Web GUI
Note: If your camera is connected to the back of an NVR, you do not need to set the date and time on each camera. The NVR will do that automatically. If you don't have Config Tool yet, you can follow this link: Config Tool When you open Config Tool, ...