Titanium IPC || Adding TVT Fisheye camera as different views using RTSP custom protocols || WEB GUI
To add a single Fisheye camera as multiple views, each with their own visual angle, you must first create Custom Protocols for each intended view.
Function Panel > Camera > Add Camera > Add Manually > Select Protocol to Custom >
Change Status to ENABLE (configuration will be greyed out at first)
Set the first protocol's resource path as depicted below and save with OK
The following profiles are needed to set different views. You must create a different custom protocol for each view.
Custom protocol 1/2/3/4 (also set show name as desired)
Must enter /profile(#) ......
.ex: /profile4 is for main stream
/profile5 is for substream
Profile 4/5 is panoramic
then 6/7 is ptz view
8/9 is ptz view
Profile 2/3 are the original (main/sub) fish eye view
Then you are going to add the cameras IP address and set protocol to custom protocol and select ADD.
Related Articles
ENS IPC || Adding a Fisheye SIPSFCMS/13-EB with multiple panel views || Web GUI
Adding a fish eye with multiple panel views. Web_GUI SIPSFCMS/13-EB V5.7.190 build 220725 Ensure that you have two sections on the live view page (IE mode was enabled) Two options software and hardware sections.Software solely for a temporary live ...Diamond IPC || How to Set Fisheye Dewarp (WEB 3.0) ||
How to Set Fisheye Dewarp (WEB 3.0) This article provides a step-by-step guide for configuring the fisheye dewarp function on devices using the WEB 3.0 firmware. The instructions may vary slightly depending on the model and firmware version of your ...Diamond IPC || How to Set Fisheye Dewarp (WEB 5.0) ||
How to Set Fisheye Dewarp (WEB 5.0) This article provides a step-by-step guide for configuring the fisheye dewarp function on devices using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your ...Titanium Recorder || Add Emerald IPC to Titanium NVR || WEB GUI
Emerald IPC cameras come with ONVIF enabled by default. 1- Identify the camera on the network using ENSTools, login and configure a static IP address. 2-Login on the 3rt party brand in this case is a Titanium NVR, add camera and use the manual ...Titanium Recorder || ENS Analog HD Camera Audio Over COAX on Titanium DVR || WEB GUI
This report is composed to show findings of an ENS Analog HD Camera, Specifically model SCC35T4M/28-H that shows camera's built-in MIC working over COAX with a Titanium DVR. Analog HD camera, Model SCC35T4M/28-H Needs to know if Built-in Mic will ...