Titanium IPC || Defaulting an IP Camera || Web GUI

Titanium IPC || Defaulting an IP Camera || Web GUI

Default Camera IP: 192.168.226.201
Default username/password: admin/123456

To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.

Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).

Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”.

After logging into the camera, select “Config”

After selecting Config, select “Backup and Restore” under Maintenance.

After selecting Backup and Restore, select the “Load Default” button. There will be a pop up requesting that you confirm the action. Confirm it and the system will load the default settings for the camera.

    • Related Articles

    • Titanium IPC || How to Initialize an IP Camera || Web Client

      To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...

    • Titanium Recorder || Add Emerald IPC to Titanium NVR || WEB GUI

      Emerald IPC cameras come with ONVIF enabled by default. 1- Identify the camera on the network using ENSTools, login and configure a static IP address. 2-Login on the 3rt party brand in this case is a Titanium NVR, add camera and use the manual ...

    • Titanium IPC || PTZ Tour / Cruise Setup || Web GUI

      Titanium PTZ Tour/ Cruise Set-up || Web GUI Login to Camera through IP address Select Config Select PTZ Select Auto Feature Then select Presets Create separate Presets for each view you would like to be focused on during the tour After all you ...

    • Titanium IPC || How to Set Up External IP Camera || Web Client

      To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Note: You will need to use the IP Tool (IPTool 2.0) to configure cameras that are on an external POE switch. With this tool, you will be able to ...

    • Diamond IPC || Set IP Camera to Static || Web GUI

      Note: If your IP Camera is connected to the back of an NVR, these instructions will not apply. Download and install ConfigTool The Config Tool should display your IP Camera. Click the, icon to open Internet Explorer and access your IP Camera. Login ...