Titanium IPC || How to add ED-DB2-IC-W (Doorbell) through WIFI || Web GUI
Connecting a Doorbell to a Wireless Network
Physical Connection:
- Use the network cable to connect the doorbell to any available Ethernet port on the wireless router or access point (AP). You'll need to attach a 12V 5A power supply if you're not connecting it through a POE.
Connect PC to Wireless Network:
- Use your PC to connect to the wireless network that you'll be using for the device setup.
- Device will not work on Wi-Fi if it is connected over POE. Use a 12V 5A power supply to power the device and connect the doorbell to Wi-Fi.
Discover Device with IPTool:
- Run the IPTool application on your PC.
- Locate the device on the network using its MAC address or Model Number.
- Double-click the device entry in the IP-Tool. This action will open the login interface of the camera.
Web Browser and Compatibility:
- Ensure you have a compatible web browser: IE (plug-in required), Edge or Google Chrome.
- It's recommended to use the latest version of these web browsers for optimal performance.
- Depending on the browser and plug-in, the menu display and camera operation may vary slightly.
- Installing the plug-in can provide access to more camera functions.
Login to Camera:
- Enter the default username and password in the camera's login interface.
- Username: admin Default Password: 123456
Configure Wireless Settings:
- Click on "Config," then navigate to "Network" and select "WIFI."
- Enable Wi-Fi functionality.
- Choose the desired wireless router from the list.
- Enter the Wi-Fi key (password) for the chosen network and click Save.
IP Address Configuration:
- Choose between "Obtain an IP address automatically" or manually enter the IP address by clicking "Use the following IP address."
- Enter the required IP address information.
- Click "Save" to save the settings.
Disconnect Ethernet Cable:
- Safely disconnect the network cable from the camera.
Access Camera Using IP-Tool:
- Run the IP-Tool application again.
- Locate the camera using its IP address or MAC address.
- Double-click the camera's listing in the IP-Tool. Alternatively, enter the camera's IP address in a web browser's address bar to access the camera's interface.
Please ensure that you have the necessary information and equipment on hand before starting the setup process. Always follow manufacturer instructions closely for specific details related to your device.
Related Articles
Diamond IPC || How to Link the WIFI Camera (HNC3V141S-IR/28-W) to the Local WIFI Network || Web GUI
***Note: You must use Internet Explorer to view the system via web interface*** Before making the wifi camera capable of wifi connection for the IE Web interface access or NVR recording, two things are needed to be done beforehand. Note: This camera ...Titanium Mobile App || Adding Doorbell ED-DB2-IC-W to Superlive Plus app
Setting Up a Video Doorbell Using Mobile App: Prepare Your Phone: Enable the Wi-Fi network on your phone. Open your phone's app store and search for "Superlive Plus." Install the mobile app on your phone. Log In or Register: Launch the "Superlive ...Titanium Doorbell || ED-DB2-IC-W Wired Network Connection ||
Web Browser and Compatibility: Ensure you have a compatible web browser: IE (plug-in required), Edge or Google Chrome. It's recommended to use the latest version of these web browsers for optimal performance. Depending on the browser and plug-in, the ...Diamond IPC || Wifi Doorbell Setting up HNC2DB112-W
Contents in box 1) Power with 12v power supply (1-2amp is fine) 2)If the device does not automatically power on, you will need to hold down the reset button in the back of the unit 3)Scan QR code using DMSS application, be sure not to be so close ...Titanium Recorder || Add Emerald IPC to Titanium NVR || WEB GUI
Emerald IPC cameras come with ONVIF enabled by default. 1- Identify the camera on the network using ENSTools, login and configure a static IP address. 2-Login on the 3rt party brand in this case is a Titanium NVR, add camera and use the manual ...