Titanium IPC || IP-PT1100 - Add a PTZ (Video)

• Related Articles

• Titanium IPC || PTZ Tour / Cruise Setup || Web GUI

  Titanium PTZ Tour/ Cruise Set-up || Web GUI Login to Camera through IP address Select Config Select PTZ Select Auto Feature Then select Presets Create separate Presets for each view you would like to be focused on during the tour After all you ...

• Titanium Recorder || Add Emerald IPC to Titanium NVR || WEB GUI

  Emerald IPC cameras come with ONVIF enabled by default. 1- Identify the camera on the network using ENSTools, login and configure a static IP address. 2-Login on the 3rt party brand in this case is a Titanium NVR, add camera and use the manual ...

• UNV IPC || How to setup IP PTZ control & Basic Functions

  How to setup IP PTZ control & Basic Functions Note - These functions are available only for the PTZ cameras. Please see the actual model for details. - Some of the lens control functions are applicable to cameras equipped with motorized lens. - The ...

• Titanium IPC || IP-PT1100

  Network Setup for keyboard Default password is 8888 Login Keyboard: Press SETUP key System Setup -> Network Setup -> Local IP Setup IP Address : Insert valid IP address for the keyboard. Subnet Mask: Insert valid Subnet Mask for the keyboard Default ...

• Titanium IPC || Modify a Titanium IPC Address

  Titanium IPC cameras IP address is 192.168.226.201 by default. We have two ways to change IP on the camera: we can change IP by the IPtool or log into to the camera or configure a static IP address. 1-Change IP by IPtool: Open IPtool as administrator ...