Titanium IPC || IPC RTMP Streams

Titanium IPC || IPC RTMP Streams

Camera will support RTMP in version 5.1.1

The introduction for the usage of RTMP on IPC

 

Note:

  • RTMP Protocol only can support H.264(Audio&video)

  • IPC support from version 5.1.1(All camera series supported)

 

  1. Click the RTMP module in the NetWork module
     

    image-1622185873083.png


    1、Click Enable, and please confirm that the selected video encoding format is H264，Enter the time to reconnect after the timeout, then enter the URL given by the RTMP server in the Server Address, and then save it. You can see that it is not connected at Connection States. After saving the configuration, click the Refresh button to view the connection status.
     

    image-1622185879924.png


    You can see that it is not connected now

    image-1622185891887.png


    The connection will be successful after you click the refresh button

    image-1622185904968.png

    Please make sure it is in H264 format when you select the code data to be pushed at Stream Type. You also can switch the code data format online.

    image-1622185910805.png


     
    If it is a server without permission restrictions, such as the URL given by the local server, you can use this URL to pull the message stream in the VLC player to view the effect on push message stream. The specific operations     are as followers.

image-1622185916635.png 

image-1622185949082.png

image-1622185955393.png



 If it is a licensed RTMP server, such as YouTube, which can only preview effect on push message streaming on its given page.

    • Related Articles

    • Titanium Recorder || Distinguish the corresponding code streams in NVR and IPC

      How to distinguish the corresponding code streams in NVR and IPC? (1) If not enable 'System>General Setting>App Live Self-adaption', when APP connects to DVR/NVR, APP will not change device substream. (2) If enable 'App Live Self-adaption', when APP ...

    • Diamond IPC || Set Up RTMP on a Diamond IP Camera (WEB 5.0)

      How to Set Up RTMP on an IP Camera (WEB 5.0) Real-Time Messaging Protocol (RTMP) in IP cameras is used for efficient live streaming of audio, video, and data over the internet. It provides low latency streaming for real-time viewing, ensures stable ...

    • Titanium IPC || Modify a Titanium IPC Address

      Titanium IPC cameras IP address is 192.168.226.201 by default. We have two ways to change IP on the camera: we can change IP by the IPtool or log into to the camera or configure a static IP address. 1-Change IP by IPtool: Open IPtool as administrator ...

    • Titanium IPC || Titanium IPC Firmware Update

      Titanium Upgrade Firmware IP camera: We have three ways to update FW on IP cameras: Directly through the camera’s GUI, through the upgrade tool, or by the NVR that is running the 1.4.6+ FW version. Note: If you have a kernel update, perform the ...

    • Titanium Recorder || Add Emerald IPC to Titanium NVR || WEB GUI

      Emerald IPC cameras come with ONVIF enabled by default. 1- Identify the camera on the network using ENSTools, login and configure a static IP address. 2-Login on the 3rt party brand in this case is a Titanium NVR, add camera and use the manual ...