Titanium IPC || ONVIF profile issue with Titanium Cameras with firmware version 5.1.2 and older

Titanium IPC || ONVIF profile issue with Titanium Cameras with firmware version 5.1.2 and older

ONVIF profile issue with Titanium Cameras with firmware version 5.1.2 and older

 

Cameras with firmware 5.1.2 or older have an issue with ONVIF profiles. By default the cameras will have an ONVIF profile named "admin" and will have the privileges set to "Normal User". This profile will not be accessible even when the user name and password is correct.

Changing the password to this account will have no effect when users attempt to use the profile to login via an IPC tester or when they cross product lines and have to use the ONFIV profile due to the profile password change not taking effect.

Deleting the profile and creating a profile with the same user name and password will correct the issue (workaround), If camera is defaulted the ONFIV profile will be defaulted to its original state and the workaround will not longer work and the profile will have to be deleted and created again.

Updating firmware to 5.1.3 will correct the issue

 

    • Related Articles

    • Titanium IPC || Titanium IPC Firmware Update

      Titanium Upgrade Firmware IP camera: We have three ways to update FW on IP cameras: Directly through the camera’s GUI, through the upgrade tool, or by the NVR that is running the 1.4.6+ FW version. Note: If you have a kernel update, perform the ...

    • General || ONVIF

      What is ONVIF (Open Network Video Interface Forum)? ONVIF is a global open standard that allows IP based CCTV equipment from different manufacturers to communicate with each other. An example of ONVIF in action would be if you used a NVR from our ...

    • Titanium Recorder || Add Emerald IPC to Titanium NVR || WEB GUI

      Emerald IPC cameras come with ONVIF enabled by default. 1- Identify the camera on the network using ENSTools, login and configure a static IP address. 2-Login on the 3rt party brand in this case is a Titanium NVR, add camera and use the manual ...

    • Diamond IPC || How to Perform Firmware Update (WEB 5.0) ||

      How to Perform Firmware Updates (WEB 5.0) This article provides a step-by-step guide for performing firmware updates on devices using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your device. ...

    • ENS IPC || SN7864R-M Firmware update for Cameras

      If the cameras are of the same ENS series, firmware updates can be conducted through the NVR using two different methods. Home --> Camera Camera --> IP Camera. Hover over camera and click on circle with arrow . Click Yes. Click on Check for Update. ...