Titanium IPC || PTZ Tour / Cruise Setup || Web GUI

Titanium IPC || PTZ Tour / Cruise Setup || Web GUI

Titanium PTZ Tour/ Cruise Set-up || Web GUI

  • Login to Camera through IP address

  • Select Config

  • Select PTZ

  • Select Auto Feature

  • Then select Presets

  • Create separate Presets for each view you would like to be focused on during the tour

  • After all you presets have been created and saved move to the Cruise tab

  • Create a Cruise add each Preset configured in the earlier steps that you wish to add, in the order you wish the camera to follow.

  • Then select the Time you would like the Preset to stay at a certain spot

  • Name the Cruise and click OK

 

Start the Cruise

    • Related Articles

    • Titanium IPC || Enabling PTZ Auto Tracking

      Enabling Titanium PTZ Auto Tracking Logging into the camera directly Select Config on web page On the left hand side choose an “Event” For this example we chose “Line Crossing” Enable the event Enable “Trigger Track” Save settings In the next section ...

    • Diamond IPC || Set up PTZ auto tracking while on tour mode

      Log into the PTZ camera through the web GUI. Select Setting. Select PTZ and then select Function. Use the PTZ controls to position the camera at the starting point. Depending on how large of a distance that needs to be covered, several presets will ...

    • Titanium PTZ || How to Configure Cruise Settings for PTZ Cameras ||

      How to Configure Cruise Settings for PTZ Cameras This guide provides instructions on configuring cruise settings for PTZ (Pan-Tilt-Zoom) cameras through the NVR interface. Cruise settings allow the camera to automatically move between preset ...

    • Diamond IPC || Setting Up Auto Tracking PTZ || Web GUI

      NOTE: You can have multiple presets with auto tracking, but there is a delay of about 1 second when the camera swaps between them. This is affected by the complexity of the scene and how many auto tracking presets you have enabled. 1. Log into your ...

    • Diamond IPC || Setting Up Auto Tracking PTZ New Interface || Web GUI

      Diamond IPC || Setting Up Auto Tracking PTZ New Interface || Web GUI Begin by accessing the Web GUI of the PTZ camera and select the setting icon in the upper right of the web page. Select PTZ and adjust where you would like to set the home position ...