To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.

Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).

Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”.

Click on “Config” then select “Storage

Click on the “Format” button. Upon successful format the state status will be “normal”. Allow time for initial format. If the camera reads “No card” the SD card is not being detected. Please check the SD card size and reseat the SD Card.

Click “Record” for additional settings:
        - Record stream: Select which record stream is used during SD Card recordings.
        - Pre-record time: Setting a pre record higher than 0 will result in the event record trigger occurring x amount of seconds                   before the actual event occurs.
        - Cycle write: Allows the camera to record over old data. If set to no, camera will cease recording if SD Card hits maximum                 capacity.
        - Timing: Enable the scheduled record schedule. Camera will record through times within the schedule.

Click the desired record event such as motion, intrusion, tripwire, face detection. You will need to enable the function. Reference the individual document for motion or analytic function configuration. Motion will be used in the example.

Select “Trigger SD snap” to save a snapshot to the SD card when the event occurs. “Trigger SD Recording” will trigger a video recording when the event occurs.

SD card Playback:
        - Click Search.
        - Select date.
        - Set time frame (if desired).
        - Click the magnifying glass icon.

SD Card Playback:
        - Select the desired event or recording in the list.
        - Click Play icon.
        - To download the event or record file select the “download” arrow.

SD Card Player: If footage needs to be recovered from the microSD card directly.
        - Connect MicroSD Card to computer
        - Install “SDPlayer” *ADD LINK*

Upon connecting SD Card you will have proprietary files on the mSD card.

Open SD Player
        - Select start and end time.
        - Click Search.
        - Select File.
        - Click Play.

Export file from SD Card format to .avi
        - Search desired timeframe.
        - Select “export one” to export single file.
        - Select “export full list” to export all items listed.
        - When you press the export button you will be prompted for a file path.
        - Set to desired file path and press “Ok”.

After export completes navigate to the selected file path to play back file. Use Codec pack or VLC if file does not play back natively.