Titanium Mobile App || License Plate Notification Setup on Super Live Plus || Web GUI
1. Set configurations on the NVR for LPR, first enable the Push Message settings.
2.Set Plate Recognition settings, Enable Successful Recognition and Strange Plate, and select Push, then click Apply.
3.Set Push Setting on the APP, and select Plate Recognition
4.Trigger the plate recognition alarm, then check the received notifications on the APP.
Notice:Currently, the Vehicle Owner and Mobile is not added to the notification list, but will be added in the future.
Related Articles
Titanium Mobile App || Adding Device to Mobile Application (Super Live Plus) || WEB GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Titanium Mobile App || Playback and Save on Super Live Plus
(This demonstration was done on an iPhone 12 with Software version 15.6.1) 1) We will begin this demonstration on the Home screen already having selected the Recorder we will perform the Playback on. Tap on the Playback button at the bottom of the ...Titanium IPC || Setting Up License Plate Recognition || Web GUI
You will need a Titanium NVR and Titanium IP Camera that support the License plate Recognition function. Select “Function Panel” on the main page after logging in. After selecting “Function Panel”, select the “Camera” option. Add Camera on the upper ...Titanium Mobile App || Adding a device to Super Live Plus via P2P
Adding P2P Video If this is your first time running Super Live Plus, you will be prompted by a tutorial. You can swipe to go through the tutorial or press "Skip" At the end of the tutorial you will have an option for "Local" or "Start". Click "Start" ...Titanium Mobile App || Adding Device to Mobile Application (Super Live Plus) || Local GUI
Login. After logging in, click on the icon on the bottom left hand corner and select “Settings” On the Settings page, click on Network. On the TCP/IP Page, place a check mark for “Obtain an IPV4 address automatically” and “Obtain DNS Automatically”, ...