UNV General || UNV Browser Support

UNV General || UNV Browser Support

Plugin free browser support

later than Chrome 57
later than Firefox 58
later than Edge 16
later than Safari 11

Firmwares support

IPC later than 19xx.
NVR later than D023.

Models not supported

Low end B series NVR301-08B-P8, NVR301-04B-P4, NVR301-08LB-P8 do not support. 

PC6258SR-X22P, IPC268ER9-DZ do not support.

 

    • Related Articles

    • UNV Recorder || Setting Up 3rd Party Cameras || Web GUI

      Please note: A Uniview NVR with Uniview cameras plugged into the internal POE of the recorder will essentially be plug and play. Third party cameras are not able to be set in this manner, so manual configurations must be made for the NVR to connect ...

    • Diamond General || Browser Support

      Nonplugin supported on 2020 and higher firmware. Note: Some specific specialty models may be excluded. Differences

    • Titanium General || Titanium Browser Support

      1.4.5 and above firmware supports HTML5. The autonat.com website will still use the normal plugin. You will need to port forward to use Chrome for remote viewing.

    • UNV General || Cheat Sheet

      Recorder Ports: HTTP port 80 Web access. *Required for port forwarding. HTTPS port 443 HTTPS web access RTSP port 554 RTSP. Port takes place of server/data port. *Required for port forwarding. IP Cam Ports HTTP port 80 Web access. *Required for port ...

    • UNV General || UNV Password reset using a MAC

      UNV Password reset - MAC Use this guide if you need help getting the device serial number using a MAC. If you already have the Serial number, please give it to the ENS Technician along with the current date of the camera. First download EZ Station ...