UNV IPC || How to Set IP Camera to Static

UNV IPC || How to Set IP Camera to Static

 

  1. Download and install EzTools 2.0 

    1. You can do so using this link: https://drive.google.com/drive/folders/10aLpN_9r6WxAGqb_CAtSSmPRU6tbZxu1 

  2. Once installed click and open the app 

     

  3. Once it’s opened, it will scan for devices on the network. You can click the IP button to modify the address. Fill out the desired IP Address, subnet, and gateway. Type the password in the password field and click OK.
    Step1.png

    You may also use device config to change the address or enable DHCP. When you see the device you are looking for, click on the Device Config icon which looks like a gear.

  4. Once you click that you will be prompted to login to the camera, enter the information and click “Ok”. The default is admin/123456

  5. Once you have logged in you will be presented with the screen below, you will need to click on the Network Tab

  6. From there you will click “IP Obtain Mode” and a drop down menu will appear and you will click “Static IP Address”. You will enter the correct network information and click “Save”.

  7. After clicking “Save” you will see a warning that will let you know that changing the IP address may cause network disconnection. After reviewing the network information click “Yes” and it will let you know if it successfully updated the IP information. 

 

 

    • Related Articles

    • UNV Recorder || IPC Initialization || Web GUI

      Please note: A Uniview NVR with Uniview cameras plugged into the internal POE of the recorder will essentially be plug and play. By default, cameras have DHCP enabled, however, when plugged into the back the NVR, it will receive a static IP address. ...

    • Emerald IPC || How to Set IP Camera to Static

      1. After logging in go under setup, go to network settings on the left hand side, then click on network once more 2. The option where it says obtain IP address you're going to want to click on that option and a drop-down menu appears, from there you ...

    • Diamond IPC || Set IP Camera to Static || Web GUI

      Note: If your IP Camera is connected to the back of an NVR, these instructions will not apply. Download and install ConfigTool The Config Tool should display your IP Camera. Click the, icon to open Internet Explorer and access your IP Camera. Login ...

    • UNV IPC || Updating Uniview IP camera firmware

      Updating Uniview IP camera firmware Uniview offers firmware updating via cloud server. There are multiple ways of upgrading the firmware for your IP cameras. Method 1. Updating From The NVR Log into the Main Menu of the recorder. Navigate to Camera > ...

    • ENS IPC || External 3rd Party IP Camera Initialization || Local GUI

      Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. After selecting the menu, select the Camera tab. When selecting the Camera tab, you will be taken to the camera ...