UNV IPC || LPR WEB GUI Set up guide || Web GUI

UNV IPC || LPR WEB GUI Set up guide || Web GUI

Step 1.

From LPR WEB GUI

Setup > System > Photo Server 

(include all details as shown below, Server Port MUST be 5073)

-----> when setting up multiple LPR cameras, the Device ID must be different per camera. Changing only the last value is fine. 

image-1643651485434.png

Step 2. 

From NVR WEB GUI.

Setup > Platform > Video & Image Database

Enter details/credentials of LPR as depicted below

 

 

image-1643651598314.png

Step 3.

Setup > Platform > Configure VIID Local 

Check to verify that status of photo server is ONLINE for the LPR Channel ID (Device ID)

image-1643650463668.PNG

 

Step 4. 

Setup > Camera > Schedule > Recording Schedule

                            --> enable event recording for LPR CH 

image-1643650497633.PNG

 

Step 5. 

Setup > Schedule > Snapshot Schedule 

                       --> enable event recording for LPR CH image-1643650506341.PNG

Step 6
Create a default folder by clicking "Add" and name folder under the "Plate List" tab.
image.png
Step 7
Click on "Monitoring --> Add Monitoring Task.  Fill out the information on the pop up and ensure you select the camera. Under recording, select the camera once more and click "OK" when done. 
image.png
Step 8 
Ensure Monitoring is on
image.png
Step 9
Review LPR Captures.

From NVR WEB GUI 

Smart> VCA Search > Vehicle Search > select channel/date & search.

image-1643650515306.PNG

 

    • Related Articles

    • UNV Recorder || HC121 UNV LPR Email Notification Setup || Web GUI

      From NVR WEB GUI Step 1. Go to Smart > Vehicle Detection > Plate List > Add (you can name the group what you like) Add plate numbers to this group for white list (or any other created group) Step 2. Select Monitoring Tab UN-HC121@TC-08S-Z UNV LPR ...

    • Diamond IPC || LPR237-6M-IRLZF1050-B LPR configuration || Web GUI

      This tutorial will guide you through the Diamond series License Plate Recognition (LPR) camera configuration. LPR camera is the first and most critical element of a complete parking lot entry and exit management system. Note: SD card is required for ...

    • Diamond IPC || How to Set Snapshot Function (WEB 3.0) || Web GUI

      How to Set Snapshot Function (WEB 3.0) This article provides a step-by-step guide for configuring the snapshot function on devices using the WEB 3.0 firmware. The instructions may vary slightly depending on the model and firmware version of your ...

    • UNV Recorder || IPC Initialization || Web GUI

      Please note: A Uniview NVR with Uniview cameras plugged into the internal POE of the recorder will essentially be plug and play. By default, cameras have DHCP enabled, however, when plugged into the back the NVR, it will receive a static IP address. ...

    • Diamond IPC || How to Set P2P Function (WEB 5.0) ||

      This article provides a step-by-step guide for configuring the P2P (peer-to-peer) function on devices using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your device. What is P2P? P2P ...