UNV IPC || PTZ Auto Tracking

UNV IPC || PTZ Auto Tracking

Log into the PTZ.
image.png

Click on Setup
image.png


Navigate to Intelligent- -> Smart  --> Auto Tracking., then click on the Gear icon image.png


Enable Alarm Sound and Alarm Lights if needed under "Trigger Actions" 

    • Related Articles

    • Titanium IPC || Enabling PTZ Auto Tracking

      Enabling Titanium PTZ Auto Tracking Logging into the camera directly Select Config on web page On the left hand side choose an “Event” For this example we chose “Line Crossing” Enable the event Enable “Trigger Track” Save settings In the next section ...

    • Diamond IPC || PTZ Auto Tracking Configuration (new GUI)

      Diamond Auto Tracking PTZ (Updated GUI) From the main view of the PTZ, select the home button Then select PTZ Under preset, add a preset, and move the camera for the first preset using the PTZ controls. We will use this preset as the Home position. ...

    • Diamond IPC || Setting Up Auto Tracking PTZ || Web GUI

      NOTE: You can have multiple presets with auto tracking, but there is a delay of about 1 second when the camera swaps between them. This is affected by the complexity of the scene and how many auto tracking presets you have enabled. 1. Log into your ...

    • Diamond IPC || Setting Up Auto Tracking PTZ New Interface || Web GUI

      Diamond IPC || Setting Up Auto Tracking PTZ New Interface || Web GUI Begin by accessing the Web GUI of the PTZ camera and select the setting icon in the upper right of the web page. Select PTZ and adjust where you would like to set the home position ...

    • ENS IPC || Smart tracking for ENS PTZ camera

      ENS IPC || SPT5C425IR-E(T5) Setup PTZ Smart Tracking Access the web portal for the PTZ camera and go into VCA Within VCA Resource>enable Smart Event and click save Go into smart event and enable the smart event you want to be triggered(intrusion, ...