UNV IPC || Setting Up Spot View || Web GUI

UNV IPC || Setting Up Spot View || Web GUI

To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.

Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).

 

Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”. In some instances, you may need to close the web browser to complete the installation. After installation completes, please re-open Internet Explorer.

 

After logging in, select the “Setup” option.

 

After selecting Setup, click on the Preview sub-menu.

 

Under the Preview menu, select the Video Output option. Select the monitor (HDMI2/VGA/Etc.) that will be the secondary monitor.

 

After selecting the secondary (spot out) output, configure the channel display as desired. You are able to set multiple channel display types throughout the sequence if desired as well.

iweb

 

    • Related Articles

    • Diamond Recorder || Setting Up Spot View || Web Client

      ***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...

    • UNV Recorder || Setting Up Spot View || Local GUI

      Log into the system by entering the username and password. Default credentials are admin for the username and 123456 for the password. After logging in, move the mouse to the lower left hand corner of the screen and select the home icon. You may ...

    • UNV IPC || LPR WEB GUI Set up guide || Web GUI

      Step 1. From LPR WEB GUI Setup > System > Photo Server (include all details as shown below, Server Port MUST be 5073) -----> when setting up multiple LPR cameras, the Device ID must be different per camera. Changing only the last value is fine. Step ...

    • ENS Recorder || Configuring Spot Out View || Web Client

      To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...

    • Diamond IPC || Setting Up Auto Tracking PTZ New Interface || Web GUI

      Diamond IPC || Setting Up Auto Tracking PTZ New Interface || Web GUI Begin by accessing the Web GUI of the PTZ camera and select the setting icon in the upper right of the web page. Select PTZ and adjust where you would like to set the home position ...