Akuvox General || How to check for “Input Trigger” logs on Door Phones

Akuvox General || How to check for “Input Trigger” logs on Door Phones

Akuvox door phones contact Door Locks which will help you determine what method was used to trigger the relay resulting in gaining access to a property.

 

Input Logs are only available in the devices Web User Interface. To access these logs, you will need to use one of two methods below:

1. Using Cloud Remote Control Accessed through the Installer Portal.

 

  1. Go to the property where the door phone is added

  2. Select “Intercom Devices”

  1. Select under “Actions” the orange circle with “I” for info:

  1. Click on Settings

  1. You will be presented with the Settings dialog box where you can click on “Remote Control” to remotely access the doorphone.

 

2. Logging directly into the Local Graphical User Interface of the door phone.

 

  1. While onsite, you can access the door phones user interface through a web browser from a PC connected to the Local Network.

  2. Open a web browser and type in the IP address of the doorphone.

  3. Log into the doorphone with your username and password. Default is “Admin/Admin”.

  4. In the doorphone’s interface, navigate to “Door Logs” or “Access Logs”. Labeling may be different depending on the model of the doorphone. Typically under “Status > Access Logs” “Phone > Device > Door Log” or “Device > Door Logs”.

     

 

    • Related Articles

    • Akuvox General || How to check/export door access logs

      How to check/export door access logs Logs Log module contains six sub-modules used for checking the door logs, call history, temperature logs, image captured, temperature logs, motion alerts, and operation logs that can be stored for 30 days. With ...

    • Akuvox General || How to Check Temperature Logs (requires temperature module)

      How to Check Temperature Logs (requires temperature module) You can check the temperature log of any people who have been checked on their body temperature before being granted the door access etc, for security purpose. Click on Temperature Logs. Set ...

    • Akuvox General || How to Check Operation Logs

      How to Check Operation Logs Operation Logs sub-module allows you to check the operation record in the SmartPlus platform. The records mainly involve the changes made to the apartment, end user, and various access types such as PIN, RF card, Face, and ...

    • Akuvox General || Hang Up After Open Door

      Akuvox General - Hang Up After Open Door ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Log into Web Portal for the Akuvox Door Phone and navigate to: Intercom ~> Call Feature ~> Hang Up After Open Door Example: (Some models will have a different navigation in ...

    • Akuvox Cloud || How To Setup Motion Detection Settings for Door Phones

      How To Setup Motion Detection Settings for Door Phones on Akuvox Cloud You can not only enable and disable motion detection on the door phone but also set up the device motion detection type and alert trigger delay if needed. Click on Motion Setting. ...