Akuvox Local || (A01/A02S/A03) How to Upload Open Door Tone
(A01/A02S/A03) How to Upload Open Door Tone
You can upload the tone for open door failure and success on the device web interface.
To upload the tones, go to Device > Audio > Open Door Tone Setting interface.

Parameter Set-up:
Note
Related Articles
Akuvox Local || Upload Prompt Tone
Akuvox Local || Upload Prompt Tone ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ You may upload Prompt Tones to specific parameters for various Akuvox device models. S539 Door phone Example: After logging in to the ...
Akuvox Local || (E12W) Volume and Tone Configuration
(E12W) Volume and Tone Configuration Volume and tone configuration include microphone volume, speaker volume, tamper alarm volume, and open-door tone configuration. Moreover, you can upload the tone you like to enrich your personalized user ...
Akuvox Local || How to Open the Door via DTMF
How to Open the Door via DTMF DTMF feature allows users to open doors by tapping the DTMF-related Unlock button or entering the DTMF code on the indoor monitor’s keypad during a call. All Akuvox intercom devices support the door opening via DTMF. In ...
Akuvox Local || Akuvox Door Lock Wiring Diagram
Akuvox Door Lock Wiring Diagram Note: 1. Akuvox integrates circuit protection onto the main board, so you can directly connect Door Strike to Akuvox door phone. 2. When installing a Akuvox door phone at a building without an access control system, ...
Akuvox General || Hang Up After Open Door
Akuvox General - Hang Up After Open Door ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Log into Web Portal for the Akuvox Door Phone and navigate to: Intercom ~> Call Feature ~> Hang Up After Open Door Example: (Some models will have a different navigation in ...