Akuvox Local || How to Obtain IP address via IP Scanner

Akuvox Local || How to Obtain IP address via IP Scanner

Scenario

 

Akuvox IP scanner is a useful PC-based tool applied in a situation where you want to Interact with the device remotely. The IP scanner allows you to search the device IP address(es) by which you can perform targeted device reboot, reset, network setting update, and device web interface access efficiently at one stop without having to work on the device on-site.

Operation Instruction

 

  1. Prior to the Installation
    • Make sure that firewall in your PC is turned off.
  2. Applicable Devices
    • Access Control Unit: A05/A06
    • Indoor Monitor:C312,C313,C315,C317,IT80,IT82,IT83,X933
    • Door Phone:

      E10,E11,E12E16,E17,E21,E21V2,R20,R20V2,R26,R26V2,R27,R27V2,R28R29,X915,X916

Operation Procedure

Installation:

  1. Double-click on IP scanner “setup.exe” file.
  2. Go through the installation process until you finish the installation.

Search Device IP address:

  1. Search the device IP address by MAC address, Model, Room Number, Firmware version according to your need.
  2. Click on Search, and click refresh if you want to update the changes of the devices.
  3. Click on Export if you want to export the device information.

image-1649271616545.png

 

Remote Interaction with Device:

 

After the IP address is searched, you can perform targeted device reboot, reset, network setting update, and device web interface access.

 

  1. Click on the specific  IP address of the device.
  2. Click the right side of the IP scanner interface.

image-1649271626497.png

 

3. Change the DHCP or Static IP network, then click on Update if you want to change the network setting.

4. Enter the  Username and password of the device web interface, then click on Browser if you want to access the device web interface remotely.

5. Click on Reboot if you want to reboot the device.

6. Click on Reset if you want to reset the device.

 

 

    • Related Articles

    • Akuvox Local || EC33 IP Announcement

      EC33 IP Announcement If you enable the IP announcement, you can easily obtain the EC33'S IP address by holding the physical button on the control board for the deployment. You can also set the number of IP announcements depending on your needs.

    • Akuvox Local || Akuvox E12W - How to unlock doors via Motion detection

      Akuvox E12W - How to unlock doors via Motion detection. To setup the E12 to unlock on motion you will need to make sure that HTTP Unlock is enabled, Goto "Access Control > Relay > Open Relay via HTTP" and enable this feature then create user ...

    • Akuvox Local || How to Configure Web Relay On Akuvox Door Phones

      Scenario Web Relay is a network-based relay that is connected to the door lock for access control. As it is network-based, web relay gives you greater security for access control. This article teaches you how to configure web relay and web relay ...

    • Akuvox Local || SDMC: How to Add Third Party IP camera

      SDMC: How to Add Third Party IP camera Click and then . Fill in the RTSP URL of the IP camera. Fill the IP address of the access-controlling door phone. Enter the device name of the IP camera, and select the number of display channels. Enter the ...

    • Akuvox Local || RTSP configuration

      All Akuvox Doorphones that have cameras support RTSP. Akuvox RTSP string - rtsp://X.X.X.X/live/ch00_0 Setting up RTSP on Android based doorphones Step 1: Log into the device using the local IP. Default is admin / admin. Step 2: Navigate to Intercom ...