Diamond Recorder || How to Factory Default the Recorder || Local GUI
Log into the system by entering the username and password.
After logging in, right click on the screen and select “Menu”
After selecting Maintain, select Manager and then click on Default.
On the Default page, select Factory Defaults. You will be prompted to confirm the request by a popup message. Select OK
Related Articles
Titanium Recorder || How To Factory Default The Recorder || Local GUI
Log into the system. Press the icon on the bottom left hand corner, then select “Settings”. On the Settings menu, click on “System” After selecting System, select Factory Default on the left hand side of the menu. After selecting Factory Default, ...Diamond Recorder || How to Default the Recorder || Web GUI
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...Emerald Recorder || How to default the recorder || Local GUI
1.After logging in to NVR go to the Menu and select the Maintain option on the top right. 2.On the Maintain menu select Restore which is located on the left side. 3.On the Restore page you have 2 options to default the system. Default- This will ...ENS Recorder || How to Default a Recorder || Local GUI
Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. After selecting the Menu, select the Maintenance tab. On the Maintenance menu, select the Default tab. On the ...UNV Recorder || Factory Defaulting the Recorder || Local GUI
Log into the system by entering the username and password. Default credentials are admin for the username and 123456 for the password. After logging in, move the mouse to the lower left hand corner of the screen and select the home icon. You may ...