Diamond Recorder || How to Default the Recorder || Web GUI
***Note: You must use Internet Explorer to view the system via web interface***
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.
Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).
Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”.
After logging into the system, select the "MAINTAIN" button on the bottom right hand corner of the screen.
In the MAINTAIN menu, select Manager, and the select Default.
In the Default menu, select Factory Defaults.
There will be a popup box confirming that the action is being requested. Select OK and the system will default to factory settings.
Related Articles
Diamond Recorder || Resetting the Recorder Password || Web GUI
Diamond Web: How to Password Reset Recorder ***Note: You must use Internet Explorer to view the system via web interface*** ***You will need the phone app for this password reset (IDMSS Plus or GDMSS Plus) To access the web client, please use a ...Diamond Recorder || Setting Up Recording Schedules || Web GUI
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...Diamond Recorder || How to View Logs || Web GUI
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...Diamond Recorder || Configuring the Alarm and Buzzer || Web GUI
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...Diamond Recorder || Setting Up Motion Detection || Web GUI
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...