Diamond Recorder || How to View Logs || Web GUI
***Note: You must use Internet Explorer to view the system via web interface***
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.
Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).
Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”.
After logging into the system, select the MAINTAIN button on the bottom left hand corner of the screen.
In the MAINTAIN menu, select Log.
On the Log page, you will be able to select the time frame and the event type. The information will be displayed under the time and type settings.
Related Articles
Emerald Recorder || Recorder View Logs || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...UNV Recorder || How to View Recorder Logs || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Diamond Recorder || Changing Live View Layout (5.0) || Web GUI
How to Set Up Live View Layout Through Web GUI 5.0 Video: https://youtu.be/ShNG77InIsg This guide provides step-by-step instructions on how to customize the live view layout of security systems using the Web GUI 5.0. Ensure that the recorder is ...Titanium Recorder || How To View System Logs || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Diamond Recorder || Tripwire Setup (Web GUI)
Diamond Series Tripwire Setup (Web GUI) 1. From the Main Menu select AI 2. Select Parameters on the left. Then select Smart Plan. Select the camera channel at the top. Select and highlight IVS (You may need to deselect any other options). Select OK ...