Diamond Recorder || Changing Live View Layout (5.0) || Web GUI

Diamond Recorder || Changing Live View Layout (5.0) || Web GUI

How to Set Up Live View Layout Through Web GUI 5.0


Video: https://youtu.be/ShNG77InIsg


This guide provides step-by-step instructions on how to customize the live view layout of security systems using the Web GUI 5.0. Ensure that the recorder is updated to firmware version 5.0 or higher to access these features.
Confirm that the recorder is running on firmware version 5.0 or above, as this version is required to change the layout settings.
 

Access the system by logging into the recorder through the web interface using the necessary credentials to gain entry to the system settings.
image.png

 

Navigate to Settings > Remote Device from the main menu once logged in. This section allows for the management of all connected cameras.
image.png

 

Select Video Device within the Remote Device management area to proceed to the camera settings.
image.png

 

Click on Channel Sorting to rearrange the camera feeds. Channels can be dragged and moved to desired spots within the live view grid according to monitoring needs.
image.png

 

Rearrange the channels.
image.png

After rearranging the channels, click OK to apply the changes. A notification will indicate that the cameras will temporarily go offline as the new channel configuration is implemented.
image.png

 

Click OK on the notification to proceed. The cameras will disconnect briefly, usually for about a minute, to apply the changes.
image.png



Channels will briefly go offline for about a minute.image.png




Once the cameras are back online, check to ensure the channels have been moved to the correct spots as intended.image.png


 

Exit out of the Remote Device settings after confirming the changes.
image.png

 

Click on Live to view the live feed.
image.png



Select a grid layout and click Fast Live to ensure that the layout is set as desired.
image.png

 

Customizing the live view layout through the Web GUI 5.0 enhances surveillance capabilities, allowing for tailored views according to priority areas. It’s crucial for efficient monitoring and quick access to critical feeds.



Technical Support

Should there be any difficulties or further assistance with the settings is required, do not hesitate to contact the technical support team.

Email: support@enssecurity.com
Phone: (888) 397-1999

    • Related Articles

    • ENS Recorder || Live View and Playback Web Interface Layout || Web GUI

      Live View Web Interface a. Start Camera View b. Local Computer Start Record c. Stream Settings d. Mute/Volume Control e. Start Two-way Audio f. Stream Settings (Camera window) g. Split Window h. Call Preset i. Set Preset Playback Web Interface Model ...

    • Diamond Recorder || Tripwire Setup (Web GUI)

      Diamond Series Tripwire Setup (Web GUI) 1. From the Main Menu select AI 2. Select Parameters on the left. Then select Smart Plan. Select the camera channel at the top. Select and highlight IVS (You may need to deselect any other options). Select OK ...

    • Diamond Recorder || How to View Logs || Web GUI

      ***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...

    • Diamond Recorder || Resetting the Recorder Password || Web GUI

      Diamond Web: How to Password Reset Recorder ***Note: You must use Internet Explorer to view the system via web interface*** ***You will need the phone app for this password reset (IDMSS Plus or GDMSS Plus) To access the web client, please use a ...

    • Diamond Recorder || How to disable stranger notifications || Web GUI

      Diamond Recorder || How to disable stranger notifications || Web GUI Login to the WEB Gui of recorder and look for “EVENT” on the main menu. Once selected, you will select the following: AI settings > Face Recognition > Stranger Alarm Select “Enable” ...