Diamond Recorder || Setting Up Recording Schedules || Web GUI
***Note: You must use Internet Explorer to view the system via web interface***
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.
Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).
Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”.
After logging into the system, click on SETTING on the top left hand corner of the screen. Then select STORAGE from the drop down menu.
From the STORAGE menu, select Schedule, and then the Record tab.
On the Schedule page, you will be able to select the type of recording you want. You may mark the colored check box to select the recording type, then click and drag, from left to right, on the time grid below to select the recording times. Click on copy on the bottom right hand corner to copy the schedule to other camera channels. Once done, click Apply.
Related Articles
Diamond Recorder || Setting Up IVS Recording || Web GUI
Step One: Creating an IVS Rule on the camera and enabling Smartplan Login to the Camera's WEBUI Go to Settings>Events>IVS Click on the green "+" icon to add a rule. You can also rename the rule by double clicking under "Name". We will be adding a ...Diamond Recorder || Setting Up Audio Recording for DVR || Local GUI
Enable audio source 1. Login using a web browser. 2. Click on Setting > Camera. 3. Click on Encode. And then select the camera channel that support audio. 4. Click on More and checkmark to enable Audio. 6. Select the Audio source for your HD-CVI ...ENS Recorder || Setting Up Recording Schedule || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Diamond Recorder || Setting Up Recording Schedules || Local GUI
Log into the system by entering the username and password. After logging in, right click on the screen and select “Menu” On the Main Menu page, select Storage After selecting Storage, select Schedule and this will take you to the page where you will ...Diamond Recorder || Setting Up Alarm Recording || Local GUI
Setup Alarm Input From main menu, click on Alarm. Click on Alarm-in Port. We are using XVR 72 series for this example. Select the Alarm input number that you like to use. This number is correspond to the alarm port on the back of recorder. 1. Click ...