Diamond Recorder || Configuring the Alarm and Buzzer || Web GUI
***Note: You must use Internet Explorer to view the system via web interface***
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.
Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).
Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”.
After logging into the system, select Alarm.
On the Alarm page, select Exception.
On the Exception page, select any tab and select the More button. This will pop up a page with the option to enable the buzzer for these exceptions. Ensure you click on apply when done.
These options are also found under the Video Detection page as well in regards to setting a buzzer alarm. Just click on More at the bottom. There will be a pop up, make the changes needed, press ok, then Apply.
Related Articles
Titanium Recorder || Configuring Alarm and Buzzer || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...UNV Recorder || Configuring the Alarm and Buzzer Alerts || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Diamond Recorder || Configuring the Alarm and Buzzer || Local GUI
Log into the system by entering the username and password. After logging in, right click on the screen and select “Menu” On the Main Menu page, select Alarm. In the Alarm page, select Video Detect and/or Exception. These two menus will have a buzzer ...Titanium Recorder || Configuring Alarm and Buzzer || Local GUI
Log into the system by clicking on the icon on the bottom left hand corner and selecting “Login” After logging in, select “Settings” and select “Alarm” in the main menu. On the Alarm page, select Buzzer on the upper left hand corner. The Buzzer page ...UNV Recorder || Configuring the Alarm and Buzzer Alerts || Local GUI
Log into the system by entering the username and password. Default credentials are admin for the username and 123456 for the password. After logging in, move the mouse to the lower left hand corner of the screen and select the home icon. You may ...