Diamond Recorder || Configuring the Alarm and Buzzer || Local GUI
Log into the system by entering the username and password.
After logging in, right click on the screen and select “Menu”
In the Alarm page, select Video Detect and/or Exception. These two menus will have a buzzer check mark for each event that’s listed in each sub-menu. You may enable them and test the audible alarm as necessary.
Related Articles
Diamond Recorder || Configuring the Alarm and Buzzer || Web GUI
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...Titanium Recorder || Configuring Alarm and Buzzer || Local GUI
Log into the system by clicking on the icon on the bottom left hand corner and selecting “Login” After logging in, select “Settings” and select “Alarm” in the main menu. On the Alarm page, select Buzzer on the upper left hand corner. The Buzzer page ...UNV Recorder || Configuring the Alarm and Buzzer Alerts || Local GUI
Log into the system by entering the username and password. Default credentials are admin for the username and 123456 for the password. After logging in, move the mouse to the lower left hand corner of the screen and select the home icon. You may ...Titanium Recorder || Configuring Alarm and Buzzer || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...UNV Recorder || Configuring the Alarm and Buzzer Alerts || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...