To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.

Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).

Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”.

After logging in and selecting the Function Panel tab, select Alarm in the function panel menu.

After selecting Alarm, there will be a few options to the left hand side that will have areas to enable the buzzer trigger, depending on the action of the camera. Select Motion Alarm for the first buzzer area.

After selecting Motion Alarm, you will see that there is a Buzzer drop down menu. Select Buzzer and switch it from Off to On. This will then trigger an audible buzzer on the recorder when there is motion detected on a specific camera.

The buzzer option will be available for Intelligence Alarm and Sensor Alarm respectively as well. Object detection is one of the VCA functions that support the audible buzzer trigger.