Titanium IPC || Preset or Cruise Can’t Be Called After Enabling Smart Tracking on a PTZ Camera ||

Titanium IPC || Preset or Cruise Can’t Be Called After Enabling Smart Tracking on a PTZ Camera ||

Preset or Cruise Can’t Be Called After Enabling Smart Tracking on a PTZ Camera

Applies to: Titanium PTZ cameras with Smart Tracking (confirm models)

Symptom

After Smart Tracking is enabled and the monitoring position is locked, automatic PTZ functions such as preset and cruise can’t be called.

Cause

When the PTZ is in Manual PTZ Control Priority mode and Smart Tracking is enabled, only manual PTZ control (pan, tilt, and zoom) works. Automatic PTZ functions (preset, cruise) are disabled.

How Smart Tracking control modes work


Solution

To use preset or cruise, unlock the monitoring position.

  1. Go to the Smart Tracking monitoring position setup page.
  2. Click Unlock.
  3. Call the preset or cruise.


Unlocking turns off target tracking. The PTZ won’t track targets while the monitoring position is unlocked. This applies when AI events or the tracking function are enabled. If neither is enabled, the Lock/Unlock state doesn’t matter.


Reading the Lock/Unlock button

The button shows the action it will perform, not the current state:


Verification

After unlocking, call a preset or cruise. The PTZ moves to the preset or starts the cruise.