Titanium || Enable and Disable Plug and Play
Enable and Disable Plug and Play - Titanium
Access the Web UI of your recorder via the Local IP or Autonat and select "System"
Select PoE Settings
From here you will be able to disable and enable the Plug and Play function for the internal POE ports of your recorder
Related Articles
Emerald General || Emerald Plug n Play Interaction
Emerald IPC and UNV NVR Emerald IPC support “Plug and Play” with UNV NVR, the default protocol is ONVIF, basic video functions will be no problem, only intelligent functions are affected. If a customer needs to use intelligent functions, then they ...Titanium Recorder || Enable virtual host || Web GUI
The virtual host function allows you to access a Titanium IP camera that is connected to the built in PoE. This helps eliminate the need to wire directly to the built in PoE to gain access to a camera and change settings. The virtual host function is ...Titanium IPC || Enable/Disable Audio IPC (5.0.1) || Web GUI
Click "Config" Click "Video/Audio" Click the "Audio" tab Toggle the Enable function to turn audio OFF and ON. Click "Save"Akuvox Local || ( E12W) IP Announcement Enable/ Disable
( E12W) IP Announcement Enable/ Disable To set up the device IP number announcement, navigate to Device > Audio > IP announcement. Parameter Set-up: Expiration(After Reboot)(Sec): the IP announcement time after the device reboot. For example, if you ...Titanium Recorder || Enable One-Touch Disarm on Local Interface || Local GUI
For FW versions 1.4.9 & 1.4.10 Configure disarm functions in the local interface: Go to AI/Event System Disarm Enable Remote Client Add cameras you want to disarm Configure the disarming functions Click OK Apply the settings You can then use the ...