Titanium Recorder || Enable virtual host || Web GUI
The virtual host function allows you to access a Titanium IP camera that is connected to the built in PoE. This helps eliminate the need to wire directly to the built in PoE to gain access to a camera and change settings.
The virtual host function is not accessible through autonat.com
Configuration
Log into the recorder through the local IP address and click "Function Panel"
Click on "Port" under "Network".
Checkmark "Enable virtual host" and apply.
Click "Function panel", then "Camera"
Click "Settings" under the Titanium IPC you wish to log into. (Note: You must be on the local network to use this function properly.)
You will be redirected to a new tab with a login page for the IP Camera. Install the plugin, then login.
You can now access settings as though you were logged directly into the camera.
Related Articles
ENS Recorder || How to enable Virtual Host on ENS H recorders (Web GUI)
How to enable Virtual Host on ENS H recorders (Web GUI) Note: Virtual host allows you to connect to cameras using the local IP address of the recorder. Virtual host cannot be accessed remotely across different networks. Log into your recorder and ...Titanium Recorder || Accessing cameras remotely through virtual host (1.4.4) || Web GUI
The virtual host port uses two ports to communicate with the IP camera. Each channel on the NVR will have two unique ports. The virtual host port will start at 591XX for HTTP, 581XX for DATA. XX= ChID. You can port forward these ports to gain remote ...Titanium Recorder || Setup DDNS (easterndns) || Web GUI
Go to www.easterndns.com and create an account. You will receive a verification code. Verify and click submit. Click CREATE A DOMAIN. Fill in the DNS host name you want. IP Address will automatically fill with your public IP address. When finished, ...Titanium Recorder || Email notifications without less secure apps (Gmail) || Web GUI
Titanium: Email notifications without less secure apps (Gmail) - Web Gui Less secure apps is being discontinued by Google so this guide will go over what to do instead. First we will have to set up app passwords which require 2-Step Verification. ...Titanium Recorder || Finding Recorder Information || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...