Titanium Mobile App || Adding Device to Mobile Application (Super Live Plus) || Local GUI
Login. After logging in, click on the icon on the bottom left hand corner and select “Settings”
On the Settings page, click on Network.
On the TCP/IP Page, place a check mark for “Obtain an IPV4 address automatically” and “Obtain DNS Automatically”, then click “Apply”.
Select the “NAT” option on the gray option bar at the top of the screen. Once selected, make sure that “Enable” is check marked, and then click apply. As long as there is a simple network (not managed by a network administrator) and everything is physically connected correctly, this will allow the system to be viewed remotely via SuperLive Plus, or Autonat.com
***Note: For www.autonat.com, the serial code must be entered manually. This is the 12 digit code below the QR code, generally starting with the letter “N”***
Related Articles
Titanium Mobile App || Adding Device to Mobile Application (Super Live Plus) || WEB GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Titanium Mobile App || Adding a device to Super Live Plus via P2P
Adding P2P Video If this is your first time running Super Live Plus, you will be prompted by a tutorial. You can swipe to go through the tutorial or press "Skip" At the end of the tutorial you will have an option for "Local" or "Start". Click "Start" ...Titanium Mobile App || Playback and Save on Super Live Plus
(This demonstration was done on an iPhone 12 with Software version 15.6.1) 1) We will begin this demonstration on the Home screen already having selected the Recorder we will perform the Playback on. Tap on the Playback button at the bottom of the ...Titanium Mobile App || License Plate Notification Setup on Super Live Plus || Web GUI
1. Set configurations on the NVR for LPR, first enable the Push Message settings. 2.Set Plate Recognition settings, Enable Successful Recognition and Strange Plate, and select Push, then click Apply. 3.Set Push Setting on the APP, and select Plate ...Titanium Mobile App || Mobile Push Notifications for SuperLive Plus iOS
(This demonstration was done on an iPhone 12 with Software version 15.6) 1) To enable notifications, first go into the iPhone’s Settings App 2) After opening the Settings button then scroll down to the app list (it will be in alphabetical order) and ...