Titanium Recorder || How To Factory Default The Recorder || Web Client
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.
Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).
Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”.
After logging in, select the function panel, then select “System”
After selecting system, select “Factory Default” at the left hand side of the page.
After selecting Factory Default, you will have the option to retain network configurations. This is in case all network settings are confirmed correct, and would help maintain network connectivity for established connections. If left unchecked, the system will completely default all settings. The “Reset to Factory Default” button will give one additional prompt to confirm the decision to default the system as well.
Related Articles
UNV Recorder || Factory defaulting the Recorder || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Diamond Recorder || How to Default the Recorder || Web GUI
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...ENS Recorder || How to Default a Recorder || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Titanium Recorder || How To Factory Default The Recorder || Local GUI
Log into the system. Press the icon on the bottom left hand corner, then select “Settings”. On the Settings menu, click on “System” After selecting System, select Factory Default on the left hand side of the menu. After selecting Factory Default, ...Titanium IPC || How to Initialize an IP Camera || Web Client
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...