To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.

Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).

Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”. In some instances, you may need to close the web browser to complete the installation. After installation completes, please re-open Internet Explorer.

After logging in, select the “Setup” option.

On the Setup page, select Camera on the left hand side menu.

After selecting Camera, select the Schedule sub-menu.

On the Schedule page, you may click on the record types on the right hand side of the grid. These will be the recording types for each respecting camera. After selecting a recording type, click and drag within the grid area to change the recording type for a specific day and hour.

After setting up a schedule, you may press the down arrow to the right of the “Copy to” checkbox and select all the cameras that will have the same schedule.