Emerald Recorder || Recorder Schedule Recording || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.
Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).
Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”. In some instances, you may need to close the web browser to complete the installation. After installation completes, please re-open Internet Explorer.
After you login, select the “Setup” option.
Select Camera
Select Schedule
In the Schedule page, you can choose which camera you want to set up a schedule. You can set up a schedule by click on edit, set up the time of schedule you want to set.And you can copy the schedule to all camera by one click.
Related Articles
Emerald Recorder || Recorder Motion Detection || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...UNV Recorder || Configuring Recording Schedule || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Emerald Recorder || Schedule Recording || Local GUI
1.In the NVR menu, select the Storage tab located on the top. 2. Once in the storage menu, Select the recording tab located on the left. 3. In the schedule menu, select a camera from the list. Schedule is enabled by default. If it is disabled, select ...ENS Recorder || Setting Up Recording Schedule || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Diamond Recorder || Setting Up Recording Schedules || Web GUI
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...