Emerald Recorder || Schedule Recording || Local GUI

Emerald Recorder || Schedule Recording || Local GUI

1.In the NVR menu, select the Storage tab located on the top.

image.png

2. Once in the storage menu, Select the recording tab located on the left.

image.png

3. In the schedule menu, select a camera from the list. Schedule is enabled by default. If it is disabled, select to enable it.

4. Set pre-record and post-record as needed.

5. Select a color icon on the right and then draw a schedule on the left grid.

* You may also edit the schedule by clicking the edit option located on the right (above the color coded options).

image.png

In this menu, you have the option to select recording for All Day or Specific time.

6. Click OK and Save.

7. (optional) click copy to apply to other cameras.

    • Related Articles

    • Emerald Recorder || Motion Recording Configuration || Local GUI

      1. On the NVR menu, select the Alarm tab located on the top. 2.On the alarm menu, select Motion located on the left. -Select a camera for motion recording -ensure to click on Enable -On this page you can configure settings such as( trigger actions, ...

    • Emerald Recorder || Recorder Schedule Recording || Web GUI

      To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...

    • UNV Recorder || Configuring Recording Schedule || Web GUI

      To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...

    • Diamond Recorder || Setting Up Alarm Recording || Local GUI

      Setup Alarm Input From main menu, click on Alarm. Click on Alarm-in Port. We are using XVR 72 series for this example. Select the Alarm input number that you like to use. This number is correspond to the alarm port on the back of recorder. 1. Click ...

    • UNV Recorder || Configuring Recording Schedules || Local GUI

      Log into the system by entering the username and password. Default credentials are admin for the username and 123456 for the password. After logging in, move the mouse to the lower left hand corner of the screen and select the home icon. You may ...