Emerald Recorder || Intrusion Detection Configuration || Local GUI

Emerald Recorder || Intrusion Detection Configuration || Local GUI

Intrusion Detection Setup (Local GUI)

  1. In the NVR menu, select VCA

image.png

2.In the VCA menu, ensure you are on the VCA config tab located on the left and then select the camera that is needed for Intrusion detection setup.

image.png

  • Under smart intrusion prevention enable Intrusion Detection and select the gear icon .

3. On the following page, you are able to create a drawing for the intrusion detection area.

*note minimum of 3 points, maximum of 6. Double click to finish drawing.

image.png

  • You are also able to configure settings as desired (sensitivity, time threshold, etc)image.png

4. In the Arming Schedule setting you are able to set a schedule for a specific time.

5. In the Trigger Action setting, you are able to select different triggers when motion is detected on the drawn area.( buzzer, send email, pop up window)

image.png

6. Apply and save settings.

7. * optional Select copy if you wish to apply the same settings to other cameras.

 

    • Related Articles

    • Emerald Recorder || Line Crossing Configuration || Local GUI

      1. In the NVR menu, select VCA 2.In the VCA menu, ensure you are on the VCA config tab located on the left and then select the camera that is needed for line crossing setup. Under smart intrusion prevention enable Cross line Detection and select the ...

    • Emerald Recorder || Intrusion Detection Setup || Web GUI

      To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...

    • ENS Recorder || Configuring Intrusion Detection || Web GUI

      ***Please Note: This process will ONLY work with ENS Series cameras*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the ...

    • ENS Recorder || Configuring Intrusion Detection || Local GUI

      Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. In the Main Menu, select the storage tab. After selecting the Storage menu, select the Event tab. When selecting ...

    • UNV Recorder || Configuring Intrusion Detection || Local GUI

      Log into the system by entering the username and password. Default credentials are admin for the username and 123456 for the password. After logging in, move the mouse to the lower left hand corner of the screen and select the home icon. You may ...