Emerald Recorder || Line Crossing Configuration || Local GUI
1. In the NVR menu, select VCA
2.In the VCA menu, ensure you are on the VCA config tab located on the left and then select the camera that is needed for line crossing setup.
-
Under smart intrusion prevention enable Cross line Detection and select the gear icon .
-
On the following page, you are able to draw a line intrusion as desired.
- You also have many options to configure as needed. ( trigger direction, sensitivity, etc.)
3. In the Trigger Action setting, you are able to select different triggers when motion is detected on the drawn line.( buzzer, send email, pop up window)
4. In the Arming Schedule setting, you are able to set up a schedule with times as desired.
5. In the Advanced setting, you are able to specify maximum and minimum size for Motor vehicles, Non motor vehicles, and pedestrians.
6. Apply and save settings.
7. * optional Select copy if you wish to apply the same settings to other cameras.
Related Articles
ENS Recorder || Configuring Line Crossing || Web GUI
***Please Note: This process will ONLY work with ENS Series cameras*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the ...Emerald Recorder || Line Crossing Setup || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...ENS Recorder || Configuring Line Crossing || Local GUI
Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. In the Main Menu, select the storage tab. After selecting the Storage menu, select the Event tab. When selecting ...Titanium Recorder || Setting Up Line Crossing || Local GUI
Log into the system by clicking on the icon on the bottom left hand corner and selecting “Login After logging in, select “Settings” and select “Camera” in the main menu In the Camera menu, select Intelligent Analytics. Intelligent Analytics will ...UNV Recorder || Configuring Line Crossing || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...