Titanium Recorder || Setting Up Line Crossing || Local GUI
Titanium Recorder || Setting Up Line Crossing || Local GUI
Log into the system by clicking on the icon on the bottom left hand corner and selecting “Login
After logging in, select “Settings” and select “Camera” in the main menu
In the Camera menu, select Intelligent Analytics.
Intelligent Analytics will default to the Object Detection Menu. Please select Tripwire to access the line crossing functions.
In the Tripwire menu, left click and drag a line to draw the tripwire. After drawing the line, make sure to enable the Tripwire function by selecting the VCA option and turn it to ON. You can manage the direction of the line crossing with the directional drop down menu on the page as well.
After setting up the Tripwire, you will come to a page where it will ask what actions will the tripwire trigger. Please select the options wanted.
Log into the system by clicking on the icon on the bottom left hand corner and selecting “Login” After logging in, select “Settings” and select “Camera” in the main menu In the Camera menu, select Intelligent Analytics. Intelligent Analytics will ...
How to setup MD Notifications Video ***Note: You will need to download the SuperLive Plus APP from the phone’s respective APP store.*** Please make sure the recorder is well connected to the Internet. NAT is “Enable”, the NAT Status shows “Success” ...
Please note: To use line crossing function, recorder must be updated to the latest firmware (1.3.3 and above) as well as the IP cameras firmware should be at least 4.x.x for line crossing to work correctly. ***Line crossing will NOT work with 3rd ...
1. In the NVR menu, select VCA 2.In the VCA menu, ensure you are on the VCA config tab located on the left and then select the camera that is needed for line crossing setup. Under smart intrusion prevention enable Cross line Detection and select the ...
Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. In the Main Menu, select the storage tab. After selecting the Storage menu, select the Event tab. When selecting ...