Titanium Recorder || Setting Up Intrusion Detection || Local GUI
Log into the system by clicking on the icon on the bottom left hand corner and selecting “Login”
After logging in, select “Settings” and select “Camera” in the main menu
In the Camera menu, select Intelligent Analytics.
Intelligent Analytics will default to the Object Detection Menu. Please select Intrusion to access the line crossing functions.
In the Intrusion menu, left click and place points on the camera image to create a perimeter. After drawing the perimeter, make sure to enable the Intrusion function by selecting the VCA option and turn it to ON. You can manage the direction of the line crossing with the directional drop down menu on the page as well.
After setting up Intrusion detection, you will come to a page where it will ask what actions will the tripwire trigger. Please select the options wanted.
Related Articles
Emerald Recorder || Intrusion Detection Configuration || Local GUI
Intrusion Detection Setup (Local GUI) In the NVR menu, select VCA 2.In the VCA menu, ensure you are on the VCA config tab located on the left and then select the camera that is needed for Intrusion detection setup. Under smart intrusion prevention ...Titanium Recorder || Setting Up Intrusion Detection || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...ENS Recorder || Configuring Intrusion Detection || Local GUI
Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. In the Main Menu, select the storage tab. After selecting the Storage menu, select the Event tab. When selecting ...ENS Recorder || Configuring Intrusion Detection || Web GUI
***Please Note: This process will ONLY work with ENS Series cameras*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the ...UNV Recorder || Configuring Intrusion Detection || Local GUI
Log into the system by entering the username and password. Default credentials are admin for the username and 123456 for the password. After logging in, move the mouse to the lower left hand corner of the screen and select the home icon. You may ...