ENS Recorder || Configuring Intrusion Detection || Local GUI
Log into the system.
Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access.
In the Main Menu, select the storage tab.
After selecting the Storage menu, select the Event tab.
When selecting the Event tab, select the Smart Event tab.
When in the Smart Event tab, you will need to select the camera that is needed for intrusion detection setup. Then select the “Intrusion” tab. Please note that only ENS line IPC supports Intrusion VCA will show a “Intrusion” tab.
On the Intrusion page, you will be able to create an intrusion box as wanted as well as the Max./Min. Size of object in the scene for the detection. Make sure to enable Intrusion Detection by marking the checkbox.
You may also modify the schedule of motion detection under “Arming Schedule” tab.
Then you may enable the optional reactions along with the intrusion triggering, such as send email, buzzer, or trigger local alarm output, under Linkage Action tab.
Related Articles
ENS Recorder || Configuring Intrusion Detection || Web GUI
***Please Note: This process will ONLY work with ENS Series cameras*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the ...ENS Recorder || Configuring Line Crossing || Local GUI
Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. In the Main Menu, select the storage tab. After selecting the Storage menu, select the Event tab. When selecting ...ENS Recorder || Configuring Line Crossing || Web GUI
***Please Note: This process will ONLY work with ENS Series cameras*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the ...UNV Recorder || Configuring Intrusion Detection || Local GUI
Log into the system by entering the username and password. Default credentials are admin for the username and 123456 for the password. After logging in, move the mouse to the lower left hand corner of the screen and select the home icon. You may ...Emerald Recorder || Intrusion Detection Configuration || Local GUI
Intrusion Detection Setup (Local GUI) In the NVR menu, select VCA 2.In the VCA menu, ensure you are on the VCA config tab located on the left and then select the camera that is needed for Intrusion detection setup. Under smart intrusion prevention ...