Titanium Recorder || Setting Up Intrusion Detection || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.
Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).
Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”.
After logging into the system, select Function Panel and then Select Camera.
After selecting Camera, Select “Intrusion” under “Intelligence Analysis”
After Selecting Intrusion, You will be able to set the intrusion area, marking the intrustion on or off (enabled/disabled), and the duration of the trigger. There are two areas to do the same functions, one to the right hand side of the camera image, and directly below it as well. You may do up to four zones of intrusion detection. You can create up to 6 points within an area to make up an intrusion zone.
Related Articles
Titanium IPC || SD Card Recording and Playback || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Titanium Recorder || Setting Up Intrusion Detection || Local GUI
Log into the system by clicking on the icon on the bottom left hand corner and selecting “Login” After logging in, select “Settings” and select “Camera” in the main menu In the Camera menu, select Intelligent Analytics. Intelligent Analytics will ...ENS Recorder || Configuring Intrusion Detection || Web GUI
***Please Note: This process will ONLY work with ENS Series cameras*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the ...Emerald Recorder || Intrusion Detection Setup || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...UNV Recorder || Configuring Intrusion Detection || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...