Emerald Recorder || Motion Recording Configuration || Local GUI
1. On the NVR menu, select the Alarm tab located on the top.
2.On the alarm menu, select Motion located on the left.
-Select a camera for motion recording
-ensure to click on Enable
-On this page you can configure settings such as( trigger actions, arming schedule, etc.)
-You are able to draw an area for motion detection by dragging your cursor on the camera view. If you click Fullscreen, you will set all areas on the camera for motion recording.
3. Click apply
4. * optional select copy if you wish to apply the same settings to other cameras.
Related Articles
Emerald Recorder || Intrusion Detection Configuration || Local GUI
Intrusion Detection Setup (Local GUI) In the NVR menu, select VCA 2.In the VCA menu, ensure you are on the VCA config tab located on the left and then select the camera that is needed for Intrusion detection setup. Under smart intrusion prevention ...Emerald Recorder || Recorder Motion Detection || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...ENS Recorder || Configuring Motion Detection || Local GUI
Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. After selecting the Menu, select the Storage tab. After selecting the Storage menu, select the Event tab. When ...Emerald Recorder || Schedule Recording || Local GUI
1.In the NVR menu, select the Storage tab located on the top. 2. Once in the storage menu, Select the recording tab located on the left. 3. In the schedule menu, select a camera from the list. Schedule is enabled by default. If it is disabled, select ...Diamond Recorder || Setting Up Motion Recording || Local GUI
Log into the system by entering the username and password. After logging in, right click on the screen and select “Menu” On the Main Menu page, select Alarm On the Alarm page, select Video Detection, and then select Motion Detection. On the Video ...